Rope Net Playground
Home » Products » Playground Equipment » Ropes Playgrounds » Rope Net Playground
Rope Net Playground Rope Net Playground
Rope Net Playground Rope Net Playground
Rope Net Playground Rope Net Playground
Rope Net Playground Rope Net Playground


Rope Net Playground

Share to:
facebook sharing button
twitter sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
  • GM-805

  • 5.2x5.2x5m

  • 8.9x8.9m

  • 5-12 Years

  • 45-49

  • 187cm(74'')

  • GM-805.pdf


As a classic rope net climber playground, the GM-805 allows every young child to use it at the same time. They swing, climb up and down through the structure. It will help the hand-eye and hand-foot coordination, body control and strength. In the meantime, it will encourage socialization, makes it perfect for elementary and middle schools, churches and public parks. Red and Black are the standard colors for rope color options. The geometric steel frame can be powder-coated in your choice of color.

Support Post:

This will be 2 3/8"(60mm) OD phosphate dipped steel tubing, finished with polyester powder coating.

Pipe Junctions:

These will be cast aluminum,  5/8 " (16mm) wall thickness, 8" (200mm) diameter with integrated holes

for pipe connections, finished with polyester powdercoating. Junction caps are affixed with stainless steel bolts.

Climbing Nets:

This will be 16mm diameter, polyamide (nylon) rope cable with UV protection and fire retardant solution.

Each rope consists of 6 strands each containing 24 steel reinforcing strands within a polyamide sleeve,

wrapped around a solid polyamide core for a total of 144 steel reinforcing strands;

each end of the cable having a junction loop attached onto the cable with a finished aluminum sleeve

and lined with a galvanized steel wear bar. Edge ropes will contain a solid core of wound steel

cables in place of the polyamide core for a total of 168 steel reinforcing strands.

Ball Knots:

This will be a one-piece compressed aluminum ball.


Tensioning is achieved by way of a galvanized threaded eyebolt and shackle located at each Pipe Connection

capable of drawing the cables a minimum of 4"(100mm).

Basic Fasteners:

All fasteners for component attachments are stainless steel


These will be 10" (250mm) square steel plates,  1/8 " (3mm) thick, bolted to concrete blocks and attached to

the main structure with 12" (300mm) long, 2  3/8 "(60mm) OD steel tubing, all finished with either polyester

powder coating.

Anchor Bolts:

Mounting plates will be secured to concrete blocks with 7/8" (22mm) diameter x20" (500mm) long "L" Anchor

bolts, inserted into the wet concrete when poured.

Surface Mount:

Optionally, the product may be surface mounted utilizing 6" (150mm) long expansion bolts in place of the

standard anchor bolts.


This should be installed only by a licensed playground installer, trained and certified on the relevant playground  

standards in place in the region of installation, e.g., NPSI, CPSI or similar certified.


Leave a Message
Contact us




Address: Bali Industrial Zone, Qiaoxia Town, Yongjia County, Wenzhou City, Zhejiang Province, P.R. China
Tel: +86 577 67917617
Mobile: +86 189 5773 0861
Copyright © 2021 Wenzhou Gemeng Amusement Equipment Co., Ltd All Right Reserved  Sitemap