Support Post:
This will be 2 3/8"(60mm) OD phosphate dipped steel tubing, finished with polyester powder coating.
Pipe Junctions:
These will be cast aluminum, 5/8 " (16mm) wall thickness, 8" (200mm) diameter with integrated holes
for pipe connections, finished with polyester powdercoating. Junction caps are affixed with stainless steel bolts.
Climbing Nets:
This will be 16mm diameter, polyamide (nylon) rope cable with UV protection and fire retardant solution.
Each rope consists of 6 strands each containing 24 steel reinforcing strands within a polyamide sleeve,
wrapped around a solid polyamide core for a total of 144 steel reinforcing strands;
each end of the cable having a junction loop attached onto the cable with a finished aluminum sleeve
and lined with a galvanized steel wear bar. Edge ropes will contain a solid core of wound steel
cables in place of the polyamide core for a total of 168 steel reinforcing strands.
Ball Knots:
This will be a one-piece compressed aluminum ball.
Tensioning:
Tensioning is achieved by way of a galvanized threaded eyebolt and shackle located at each Pipe Connection
capable of drawing the cables a minimum of 4"(100mm).
Basic Fasteners:
All fasteners for component attachments are stainless steel
Foundation:
These will be 10" (250mm) square steel plates, 1/8 " (3mm) thick, bolted to concrete blocks and attached to
the main structure with 12" (300mm) long, 2 3/8 "(60mm) OD steel tubing, all finished with either polyester
powder coating.
Anchor Bolts:
Mounting plates will be secured to concrete blocks with 7/8" (22mm) diameter x20" (500mm) long "L" Anchor
bolts, inserted into the wet concrete when poured.
Surface Mount:
Optionally, the product may be surface mounted utilizing 6" (150mm) long expansion bolts in place of the
standard anchor bolts.
Installations:
This should be installed only by a licensed playground installer, trained and certified on the relevant playground
standards in place in the region of installation, e.g., NPSI, CPSI or similar certified.
